-用于铝合金门窗各类锁安装孔槽的铣削加工。
-由水平方向的三孔钻与垂直方向的仿型铣组成。
-三孔钻机头上下运动增加了导柱导向，保证三个孔对底面的平行。
-三孔钻后置布置，操作方便，符合人体工学原理。
-三孔钻气液阻尼自动进给，减轻了工人的劳动强度。
-仿形采用仿形模板和辅助定位两种仿形方式。
-Milling all kinds of lock holes.
-Formed by three-hole drill part (horizontal direction) and copy milling part (vertical direction).
-Movement of three drill head increases the guide pin under the guidance, guarantee the three holes on the under-side of the parallel.
-Three drill rear layout, easy operation, accord with human body engineering principle.
-Automatic feeding of three drill gas-liquid damping, reduce the labor intensity of the workers.
> 工作气压：0.5～0.8MPa
输入电源：380V/50HZ
输入功率：2.6KW
铣刀直径：φ5φ8mm
仿形范围：235×100mm
三孔钻头直径：Φ12、Φ10
三孔钻头中心距：21.5×21.5mm
外型尺寸：1000×1130×1500mm
Operation Air Pressure：0.5～0.8MPa
Input Voltage：380V/50HZ
Input Power：2.6KW
Cutter Diameter：φ5φ8mm
Copy-routing range：235×100mm
Diameter of the three-hole drilling head：Φ12、Φ10
Centers distance of the three-hole dr i l l ing head：21.5×21.5mm
Overall Dimension：1000×1130×1500mm
